{"id":1706,"date":"2013-10-02T15:21:13","date_gmt":"2013-10-02T22:21:13","guid":{"rendered":"http:\/\/www.realhd-audio.com\/?p=1706"},"modified":"2013-10-02T15:21:13","modified_gmt":"2013-10-02T22:21:13","slug":"jitter","status":"publish","type":"post","link":"https:\/\/www.realhd-audio.com\/?p=1706","title":{"rendered":"Jitter"},"content":{"rendered":"

There a number of things that can affect the quality of a digitally recorded piece of music but one of the most important of these is jitter. Simply put, jitter is an error that happens when the timings of individual samples is different during the encoding and decoding processes. The amount of sonic degradation is sometimes severe but most of the times it is a slight loss of image depth and spatial accuracy. Let’s take a close look at jitter.<\/p>\n

Analog to digital conversion involves slicing time into very short but equal length slices. A clock determines the rate of the slicing. Sometimes the clock is built into the analog to digital converter but it doesn’t have to be. In fact, professional facilities like my own don’t use the internal clocks supplied by the makers of the ADCs but instead have a highly accurate external clock that sends its tick tock signals to ALL of the digital equipment in the studio. In my facility, we have something called an Isochrone 10 M “Atomic Clock” made by Antelope Audio, which is a very expensive Rubidium atomic reference generator. This device is accurate to .03 parts per billion. Clocks don’t get much better than this. Most clocks use crystals to establish their rate, the atomic clock uses rubidium. The makers of this piece of equipment claim: “A Rubidium atomic reference generator 100,000 times more accurate than the crystal oscillators, bringing vastly improved staging, transparency and imaging.”<\/p>\n

\"jitter_master_clock\"<\/a><\/p>\n

Figure 1 – A rubidium atomic clock.<\/p>\n

It is the job of the master clock to establish the sample rate. Typical sample rates include 44.056, 44.1, 48, 88.2, 96, 176.4 and 192 kHz (I included the first one because it was among the first to be used for audio. It is actually the native rate of a video deck but was adopted for audio when digital audio recorders were first introduced via the Sony F1\/601 processor). The master clock doesn’t actually run at these rates. It uses a very high (in the MHz range) rate that is then divided down to the relatively low rates that we use in audio.<\/p>\n

During a PCM digital recording the amplitude of each sample is determined (within the discrete amplitude values supplied by the word lengths) and stored at each time slice. When it’s time to reconstruct the signal, each amplitude or sample is passed to a system that aggregates the various voltages to be output at each of the time slices. If the times slices or samples aren’t exactly the same as they were during the capture of the sound, then there is a difference that results in jitter errors. See figure 2 below to see the difference between the input and output signals IF there is excessive jitter present. The regular spacing of the source sampling rate is somewhat inconsistent on the top graphic.<\/p>\n

\"jitter_graphic\"<\/a><\/p>\n

Figure 2 – The bottom trace is the ADC process with a perfect clock source. The top trace is the DAC process with clock distortions. The middle is the comparison of the digital information…notice the input and output do not match resulting a slightly different analog waveshape output. (Click to enlarge)<\/p>\n

So just how crazy do you want to be in the establishment of accurate clocking when you play back the digital files that come from an optical disc or from a download service? As accurate as you can afford. The internal clocks of reference players with high quality DACs in them do a very good job. They often reclock the signals that come from the source files with an internal clock of their own. The result is that jitter is a known problem that has essentially been eliminated in reasonable quality gear.<\/p>\n

If I make a great sounding digital recording and you use care in playing it back, you won’t notice the “loss of transparency or imaging”.<\/p>\n","protected":false},"excerpt":{"rendered":"

There a number of things that can affect the quality of a digitally recorded piece of music but one of<\/p>\n","protected":false},"author":2,"featured_media":1715,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"colormag_page_container_layout":"default_layout","colormag_page_sidebar_layout":"default_layout","_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"footnotes":""},"categories":[45,16],"tags":[42,251,311,169],"class_list":["post-1706","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-dr_aixs_posts","category-techtalk","tag-high-resolution-audio","tag-high-resolution","tag-jitter","tag-mark-waldrep"],"_links":{"self":[{"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/posts\/1706","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1706"}],"version-history":[{"count":7,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/posts\/1706\/revisions"}],"predecessor-version":[{"id":1716,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/posts\/1706\/revisions\/1716"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=\/wp\/v2\/media\/1715"}],"wp:attachment":[{"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1706"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1706"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.realhd-audio.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1706"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}